Push-Tube Sampler

The Push-Tube Sampler is for taking undisturbed samples in normal soils. It is thin-walled steel or stainless steel tube, 1.6mm or 2.0mm thick, with one end sharpened and rolled and the other end has holes drilled in the sides to screw the tube onto a Drive Adaptor. 

The tubes are available in 38mm or 45mm or 50mm or 63mm or 76mm and in any length you require but we recommend under 300mm.  These need a Drive Adaptor and our standard Extension Rods to suit the depth required, and finally a Slide Hammer or Anvil to drive the tubes into the soil.